1. Drill a 5/6" diameter hole at the desired mounting locations, slip on the rubber boot cover, then install the lights using the bolt/nut and lock washer provided with each light.
2. Disconnect battery to avoid short circuits/electrical shock.
3. Measure the wire needed to install the lights on your boat as indicated in Figure 1, then cut the red wire into the appropriate lengths. Note: The fused power supply wire is included with this kit.
4. Place the appropriate plastic terminal covers onto the wire and attach the corresponding metal terminals.
5. Mount the switch in a convenient location using the two screws provided.
6. Snap the wiring together as indicated in Figure 1.
7. Reconnect the battery after confirming that all wiring is identical to the diagram.
8. Loosen the bolt on the side of each light, adjust the beam to the desired level and re-tighten securely.

The post WHITE HOUSING DOCKING LIGHT KIT appeared first on Boats And More | Shepparton & Echuca.

The post PERKO ANCHOR LIGHTS appeared first on Boats And More | Shepparton & Echuca.

The post PERKO ANCHOR LIGHT REMOVABLE appeared first on Boats And More | Shepparton & Echuca.

The post OUTDOOR LEISURE LIGHT EXTERIOR COURTESY WHITE appeared first on Boats And More | Shepparton & Echuca.

The post OUTDOOR LEISURE LED SWIVEL STRIP LIGHT 12V appeared first on Boats And More | Shepparton & Echuca.

Suitable for 9~36 Volts.

The post EASTERNER LIGHT DECK SPOT WATERPROOF appeared first on Boats And More | Shepparton & Echuca.

Requires 3 x 'C' cell batteries (not included)

The post BLA WHITE PORTABLE 360° NAV LIGHT LED appeared first on Boats And More | Shepparton & Echuca.

The post BLA LIGHT RECESSED LED WHITE appeared first on Boats And More | Shepparton & Echuca.

The post BLA LIGHT POLE 360 NO BASE 560MM appeared first on Boats And More | Shepparton & Echuca.

The post BLA LIGHT NAV P&S SIDE MOUNT 12V LED appeared first on Boats And More | Shepparton & Echuca.